TYA50 (3000L) lubricating oil system hydraulic oil purifier operation manual

　　TYA50 (3000L) lubricating oil system hydraulic oil purifier to deal with moisture impurities is suitable for TYA hydraulic oil filter 30L/MIN, TYD hydraulic oil vacuum oil filter 50L/MIN, hydraulic oil filter 100L/MIN, hydraulic system filter Reference for the use of small anti-wear hydraulic oil filtering equipment such as oil machine 150L/MIN and hydraulic oil filter 200L/MIN. The mechanical hydraulic oil filtration treatment of moisture and impurities is easy to understand, and the equipment operation is easy to learn.

　　TYA50 (3000L) lubricating oil system hydraulic oil purifier operating instructions

　　We know that hydraulic oil belongs to a kind of lubricating oil. The so-called lubrication is to add lubricant between two contact surfaces that move relative to each other, so that a lubricating film is formed between the two friction surfaces and separate the directly contacting surfaces , Dry friction is the internal friction between lubricant molecules, achieving the purpose of reducing friction, reducing wear, and extending the service life of mechanical equipment. The role of lubricating oil is that TYA50 (3000L) lubricating hydraulic oil purifier treats moisture and impurities:

　　1. Reduce friction: Adding lubricant to the friction surface can reduce the friction coefficient, thereby reducing friction resistance and saving energy consumption.

　　2. Reduce wear: The lubricant can reduce the wear caused by abrasive wear, surface fatigue, adhesive wear, etc. between the friction surfaces.

　　3. Cooling effect: Lubricant can absorb heat, transfer heat and dissipate heat, thus reducing the temperature rise caused by frictional heat.

　　4. Anti-rust effect: The presence of lubricant on the friction surface can prevent corrosion caused by air, water droplets, water vapor, corrosive gases and liquids, dust, and oxides.

　　5. Transmission of power: In many cases, lubricants have the function of transmitting power, such as hydraulic transmission.

　　6. ​​Sealing function: Lubricant seals some exposed parts and can prevent the intrusion of moisture and impurities.

　　7. Shock absorption: When subjected to shock load, it can absorb shock energy, such as automobile shock absorbers.

　　8. Cleansing function: Impurities can be taken away through the circulation of lubricating oil and filtered out by the filter.

　　Therefore, if the lubricating oil has impurities, it will affect its effect on the machine to reduce friction and reduce wear, thereby affecting the service life of the machine. If you can ensure that the hydraulic oil in the hydraulic system of the equipment you use reaches the required filtration accuracy, then reduce The failure played a decisive role. Therefore, the maintenance of hydraulic oil and the selection of filtering equipment are particularly important.

　　TYA50 (3000L) lubricating oil system hydraulic oil purifier operating instructions debugging:

　　(1). Connect the inlet and outlet oil pipes of the equipment to ensure a smooth oil path from the oil tank to the machine.

　　(2). Connect the power cord correctly, confirm that the oil inlet and outlet pipes are firmly connected, the phase sequence of the power inlet cord is correct, the power voltage matches the equipment, and the electronic control system is in standby.

　　(3). Check whether there are any factors affecting the operation of the equipment around, and start the machine after confirming that everything is normal.

　　(4) Equipment trial operation: close the oil inlet valve, drain valve, gas leakage valve, ballast valve, return valve, sampling valve, and oil outlet valve that are connected to the outside world; open the other valves and start the vacuum pump (electric control cabinet) The vacuum pump green button on the panel), observe the display of the vacuum gauge-the vacuum degree will rise slowly, after the vacuum gauge indicates the maximum vacuum value is stable, stop the vacuum pump (the vacuum pump red button on the electric control cabinet panel) for 5 minutes, and observe in the meantime The pointer of the vacuum gauge should not drop more than 0.005Mpa, otherwise the air leakage should be eliminated. If the vacuum pump cannot be started, it indicates that the phase sequence of the power supply line is incorrect, and the phase sequence should be changed.

　　Equipment export packaging: The conventional fumigation packaging is suitable for long-distance transportation abroad.

　　Equipment transportation methods: shipping, air transportation, automobile transportation, etc. The company will replace and repair the goods for free until the customer is satisfied with the accident during the transportation and loading.

　　Sales consulting: Manager Zhang 0086-18580036904 (same number on WeChat) 0086-02386194345

　　(Need more video training files, add mobile phone WeChat or phone consultation to learn more)

　　Delivery cycle: standard models are available in stock.