Picture of TY100 Turbine Lubrication System Turbine Oil Vacuum Oil Purifier

　　TY100 Turbine Lubrication System Turbine Oil Vacuum Oil Purifier is mainly used for steam turbine turbine oil, generator set turbine oil, water turbine turbine oil, and can also be used for hydraulic oil, refrigerating oil and the need to remove large amounts of water and achieve precise filtration of impurities Of other lubricants. Especially suitable for heavily emulsified turbine oil.

　　This machine has multiple technologies, integrating vacuum drying, separation engineering technology, coagulation technology, adsorption technology and precision filtration technology. It can solve the problems of corrosion and wear of metal parts in the steam turbine caused by the serious emulsification of oil, and ensure the safe and efficient operation of the steam turbine.

　　TY100 Turbine Lubrication System Turbine Oil Vacuum Oil Purifier Technical Features:

　　1. The ability to remove water and demulsify is strong. Adopting the best coalescence and separation technology and a special polymer material demulsification device, it can quickly and easily separate a large amount of liquid water and free water in the oil, but also remove the dissolved water in the oil, which can make the turbid emulsified oil change. Be clear and transparent.

　　2. High filtration precision, strong ability to filter impurities. Large dirt holding capacity, high strength, filter can be repeatedly cleaned and used, low cost of consumables and long service life. It can remove the fine particles in the oil, so that the heavily polluted oil system can also be restored to the "Oil Contamination Control Standard for Operating Steam Turbine".

　　3. It can realize unattended online operation with steam turbines, water turbines and other equipment, with low noise and meeting the world's high-standard environmental protection requirements.

　　4. The equipment is easy to use and user-friendly, and can automatically drain without stopping the machine.

　　5. For oil with excessive acid value, it can be used with a regeneration decoloring device, which can effectively reduce the acid value and improve the color of the oil.

　　6. The heater adopts an interlock start device, and the temperature controller can only be started when the vacuum pump and the oil pump are running at the same time, which not only ensures the safe operation of the heater, but also prevents the generation of "dead" oil areas and the aging of oil products It can also monitor the temperature of the heating system in real time and control the heater to work within a set temperature range; when the heater temperature exceeds the protection set point, it can automatically cut off the operation of the heater to ensure the safety of equipment, oil and personnel.