Working principle of single-stage high vacuum insulating oil purifier 6000L/MIN

　　Working principle of single-stage high vacuum insulating oil purifier 6000L/MIN

　　The working principle of single-stage high vacuum insulating oil purifier 6000L/MIN is suitable for ZYD insulating oil two-stage oil purifier 1800L/H, ZJA high-efficiency insulating oil two-stage oil purifier 3000L/H, and two-stage insulating oil purifier 6000L/ H. Two-stage vacuum oil purifier 9000L/H, two-stage transformer oil filter 12000/H and other vacuum oil purifier purification equipment reference. The working principle of transformer oil filtering is easy to understand, and the operation of the equipment is easy to learn. Automatic single-stage oil filter, suitable for the power industry, construction repair, cable industry, wire and fiber transformer insulation oil filtration and purification. ZYD model, ZY picture, ZJA parameters, oil processing equipment can be detected online after purification. Inspection report .

　　Single-stage high vacuum insulating oil purifier 6000L/MIN working principle picture:

　　Single-stage high vacuum insulation oil purifier 6000L/MIN main features:

　　The unique and efficient dehydration and degassing system introduces advanced German technology, uses vacuum spray diffusion, large-area planar flash evaporation technology, and efficiently and quickly removes pollutants.

　　J1. The uniquely designed heating system allows the oil to be heated evenly and evenly, and is equipped with a heater interlocking protection device.

　　J2, advanced liquid level control system and perfect protection functions (phase sequence, overvoltage, etc.) to achieve continuous online or offline work, easy operation and easy work.

　　J3, quickly and efficiently remove water, gas, free carbon and other impurities from the oil to improve the quality of the oil

　　J4, the primary filter device uses a large flow washable filter element, which has high filtration efficiency and low cost

　　J5, high-precision filter device, adopting "layered gradual density" technology, large filtering capacity and long life

　　J6, high degree of automation, humanized design of the whole machine, online work

　　J7, advanced red-external line liquid level automatic control system,

　　J8, low-watt density electric heater constant temperature automatic control system,

　　J9, electrical automatic protection control system with phase sequence protection and overvoltage protection

　　D10, environmentally friendly chassis structure design reduces environmental pollution

　　D11, provides excellent performance and compact design,

　　D12, the whole machine is small in size, light in weight and easy to move.

　　Boot process:

　　D1. Wiring preparation: connect the power supply, adjust the rotation direction of the vacuum pump and the oil pump.

　　D2. Preparation before vacuum operation: all internal valves of the machine are opened to form a passage, and the peripheral valves are closed to ensure the operation of vacuum.

　　D3. Vacuuming: Start the vacuum pump and when the pumping reaches -0.06, open the oil inlet and outlet valves at the same time to observe the oil inlet and outlet conditions.

　　D4. Start the heater: When the oil in and out reaches the equilibrium point (check through the sight glass), turn on the heater to set the temperature (20-80 degrees) and observe the temperature change.

　　Remarks: If the oil is cold and the viscosity is relatively high, we can first close the main valve of the water diversion tank and the fine filter tank, open the bypass valve, and reduce the oil by not passing through the water diversion and fine filter element. Resistance (pressure) formed by product penetration. When the oil temperature rises to 50 degrees, the main valve of the water distribution tank and the fine filter tank can be opened to form a passage, observe the change of the pressure value and adjust the pressure source.

　　D5. Circulating filtration: When the heating temperature reaches the set temperature, the heater will automatically stop. After continuous circulating filtration for 2 hours, observe the change of oil moisture content (whether there are crystals in the water atomization) and the change of color (sample observation) , Achieving satisfactory results OK.

　　Equipment export packaging: The conventional fumigation packaging is wooden box, which is suitable for domestic and foreign long-distance transportation.

　　Equipment transportation methods: shipping, air transportation, automobile transportation, etc., the company will replace and repair the goods for free until the customer is satisfied with the accident during the transportation and loading.

　　Sales consultation: Manager Zhang 0086-18580036904 (same number on WeChat) 0086-02386194345

　　(Need more video training files, add mobile phone WeChat or phone consultation to learn more)

　　Lead time: Standard type is available in stock.